- Facilities at CRL
- Transmission Electron Microscope (TEM) with EDX
- Scanning Electron Microscopes (SEM) with EDX
- X Ray Diffractometer (XRD)
- Energy Dispersive X Ray Fluorescence Spectroscopy
- Gas Chromatography (GC)
- Gas Chromatography Mass Spectroscopy (GC MS)
- High Performance Liquid Chromatography (HPLC)
- Preparative HPLC
- Atomic Absorption Spectrometer (AAS)
- Flame Photometer
- Dynamic Mechanical Analyzer (DMA)
- Surface Area and Pore Size Analyzer (SAA)
- Simultaneous Thermal Analyzer (STA)
- Bomb Calorimeter
- Zeta Sizer
- Fluorescent Spectrophotometer
- Ultraviolet Near Infrared Spectrometer
- Ultraviolet Visible Spectrometer
- Ultraviolet Visible Diffused Reflectance Spectrometer
- Fourier Transform Infrared Spectrometer
- High Speed Centrifuge
- Liquid Nitrogen Plant (LN2 Plant)
- TEM Sample Preparation Units
- High Temperature Furnaces
- Coating Units
- Viscometery
- Accessories
- Vibrating Sample Magnetometer (VSM)
Centralized Resource Laboratory
Universal Testing Machine (UTM)
Specifications:
Model: 100-500KN
Make: Testometric Inc. UK
Tests: Extension, Compression, Bending, Puncture
Max. Force: 100kN
Temp. Range: -70 to 300°
Analysis Requirements:
Mechanical analysis is only possible for solid samples (ceramics, rocks, metals, polymers etc.). For cylindrical samples, the ratio of the diameter (maximum 3 cm) to the height of the samples should be about 1:1.70, while in case of parallelopiped samples.
In case of metal/polymer/ceramic/rock strips, the length of the sample should be at least 10 cm. For metal rods, the diameter should not exceed 1cm.